The element that separates a geothermal hvac system from a traditional air to air heat pump installation is the underground loop field the air or antifreeze travels through. This is the key component to any geothermal system installation in the St Louis area. These underground fields are categorized into two models: A Horizontal Loop Geothermal Field and a Vertical Loop Geothermal Field.
Quick Summary of a Geothermal System
Geothermal systems consist of two primary components.
- Geothermal Heat Pump
- Geothermal Loop Field
The heat pump feeds air in and out of the loop field as the loop field transitions air underground to heat or cool based on the season.
Horizontal Loop Geothermal Field
Horizontal loop fields are commonly found in geothermal systems installed in more rural areas. This is due to the amount of land required when constructing a horizontal loop geothermal system. Sometimes horizontal loops can cost customers less to install due to less drilling required. The trenches required to install a horizontal loop only need to be 2-3 feet deep (although optimum levels are thought to be 6-10 feet deep), or below the freeze line.
Advantages of a Horizontal Ground Loop
- Considered to be more efficient than vertical ground loops
- Can cost considerably less to install
- Commonly thought to be easier to maintenance
Disadvantages of a Horizontal Ground Loop
- Require much more space than a vertical ground loop
- Require more piping
- Tends to require more invasive drilling over a larger area of land
Areas Around St Louis Horizontal Ground Loop Geothermal Systems Are Common
- Wildwood , MO
- Eureka, MO
- Chesterfield , MO
- St Albans
- Washington, MO
- St Charles , MO
- St Peters, MO
- Lake Saint Louis, MO
- Wentzville, MO
Vertical Loop Geothermal Field
As you move from rural to urban areas, vertical loop fields become much more common in residential geothermal system installation. The number one factor for this is available land. Many homes in suburban and urban St Louis area do not sit on a large enough plot of land to install a horizontal loop system, but with new drilling technology, geothermal system installation is available through a vertical loop geothermal system. With a vertical ground loop, geothermal contractors look to install the loop deep as opposed to a horizontal ground loop system which are installed wide.
Advantages of Vertical Ground Loop
- Require less land to install
- Require less piping to install
- When installed properly, can be just as efficient as a horizontal ground loop
Disadvantages of a Vertical Ground Loop
- Often cost more during installation due to drilling being required
- When not installed properly, can be less efficient as a horizontal ground loop
- In some cases require more pumping power
Areas Around St Louis that Vertical Ground Loop Geothermal Systems are Common
- St Louis , MO
- Brentwood , MO
- Kirkwood , MO
- Webster Groves , MO
- Ballwin , MO
- Creve Coeur , MO
- Des Peres , MO
- Richmond Heights, MO
- Sunset Hills, MO
- Fenton , MO
Vitt Heating and Cooling Offers Free Geothermal Assessments
If you have any questions regarding geothermal system installation in the St Louis area, give the geothermal experts at Vitt Heating and Cooling a call today for a free in person geothermal consultation. Our phone number is (314) 351-5580 .